Fitting the training kit :

A guide to fitting the larger training kit - for helicopters King 2 and Belt-CP.
training kit 1
First push the white plastic rings onto the metal rods - to about 4cm. Then push on the foam balls and place another plastic ring onto the end of the rod.
training kit attachment
Push two of the other ends of the rods into adjacent slots in the plastic centre hub. Make sure they are pushed all the way in. Then loosley attach the rods to the top of the skid with the tie wraps.
Attach the other two rods in the same way on the other side. Once the hub is centred you can then tighten the tie wraps, securing the training kit firmly in place.
The final result should look like this. You can buy the large training kit here


All content copyright © BuzzFlyer. No part of this guide's text or images may be copied or reproduced in any form!!