iMax B6 Charger

IMAX B6 high performance rapid charger. Will fully charge a 2100mAh battery in just 112 minutes! Simple to operate. Computerized to maintain your battery at its optimum condition. Also charges Transmitter Nicads.

Special features:

Voltage balancer for Li-polymer battery inside B6 has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Lipo battery for cell balancing.

Maximum safety Delta-peak sensitivity:

The automatic charge termination program works on the principle of the Delta-peak voltage detection.

Capacity limit:

The charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.

Processing time limit:

you can also restrain the maximum process time to prevent from any possible defect.

Input power monitor:

To protect the car battery using as input power from being damaged the voltage of it always monitored. If it drops below the lower limit the process will be ended automatically.

High-power and high-performance circuit:

B5 employs the circuit that has maximum output power of 50w. As a result it can charge up to 14 cells of Nicd/NiMH and 5 series of Li-poly batteries with maximum current of 5.0A

Specifications:

- Operating voltage range: 10.0-18.0Volt
- Circuit power: max. 50W 
- Charge current range: 0.1-5.0A
- Current drain for balancing Li-po: 200mAh/cell 
- NiCd/NiMH battery cell count: 1-14 cell
- Li-ion/Polymer cell count: 15 series 
- Pb battery voltage: 6V, 12V 
- Weight: 280g
- Dimensions: 130*80*23mm 

Note: switching adapter not included