No thanks, I don't want to customize this item
Enter customization text in the field below.
Adding item(s) to basket...
Buy this item now with low interest
and monthly repayments
Simply select AfforditNow at the checkout
More details here
OSD (On-screen display, optional purchase module) electronics can be connected to GU-INS, which provides precise data monitoring on altitude, distance, position, attitude and battery voltage.
Onboard USB interface connector for firmware update.
Interface provided to connect with standard receiver and JR satellite receiver.
1. Easy to install and setup, no need for software on PC for adjustment.
2. All functions can be setup & confirmed by LED indication.
3. All in one design (combined inertial measurement unit and main controller) with simple wiring.
4. OSD (On-screen display, optional purchase module) electronics can be connected to GU-INS, which
provides precise data monitoring on altitude, distance, position, attitude and battery voltage.
5. GU-INS provides pitch and rolls output signals, can work with different types of camera gimbals.
1.Dimensions Main controller: 53.5 x 38.5 x 12mm GPS antenna: 42 x 34 x 15mm
Weight Main controller: 27g, GPS antenna: 23g (with cable)
2.Frequency: 300Hz output to ESC
3.Operating temperature: -20~80‹C
4.Operating modes: Rate (manual) mode, Auto balance mode, GPS positioning mode.
5.Rate (manual) mode: Max angular velocity: 300 degree/sec
6.Auto balance mode: Max tilt angle: 60 degree.
7.GPS positioning mode:
a.Hovering accuracy: Horizontal: }2m, Vertical: }0.5m
b.Max yaw angular velocity: 250 degree/sec
c.Max tilt angle: 45 degree.
d.Max horizontal speed: 10 m/sC36 km/hr
e.Max vertical speed: 8 m/s (horizontal posture)
8.GU-INS provides pitch and rolls output signals, can work with different types of camera mounts.
9.Fail-safe functions: Automatic Go-Home, Signal lost Go-Home, Low voltage protection.
10.Suitable wind condition: < 10 m/s