iFlight iH2 FPV Drone with Caddx HD System

• 126.5 grams without battery
• Butter smooth XING-E 1204
• Duct prop guards to protect the sensitive environment or yourself
• Pre-tuned with smooth freestyle settings

iH2 HD BNF Specs:

• SucceX-E mini F4 + mini 35A stack
• Motor: XING-E 1204 4500KV
• Wheelbase: 120mm
• Body size: 100*68mm
• Bottom plate thickness: 2.5mm
• Top plate thickness: 1.5mm
• Top and bottom plate spacing: 22mm (aluminum column height 25mm)
• Ducted propeller size: 2 inch
• Maximum propeller size without ducts: 2.5 inch props
• FC pattern: 20*20mm，16*16mm
• FPV cam spacing: 19mm
• Weight: 126.5g (without battery)
• Flight time: 5-6 min cruising

iH2 HD Quad BNF Included Components and Parts:

Pre-built and tested Quadcopter
1x iH2 HD Frame
1x Caddx Vista Digital HD System Kit
1x TPU Antenna holder
2x TPU camera side plate soft mount
2x Emax 2 inch / 2.5 inch 3-blades (Set of 4 - Color May Vary)
1x iFlight Lipo Strap


FC // SucceX-E Mini F4

Specifications:
MCU：168MHz STM32F405
Gyro：MPU6000
Blackbox：8MB
Betaflight OSD：YES
BEC：5V 2.5A
Uarts：5
ESC Telemetry：yes
INA Pad：nuart2
Input voltage：2-6S
Size:25*25mm /20*20mm φ3 mounting
Weight: 4g
Firmware：BETAFLIGHTF4

Physical

• Mounting hole：20*20mm，φ3mm
• Size：25*25mm

ESC // SucceX-E Mini 35A

Top Features:

• 6 layers double-sided PCB board
• 2oz 1.4mm thick power board
• TDK MLCC Low ESR ceramic capacitors
• Top grade 2R203 MOSFET

Specification:

MCU: BB21 F16G
BLHeliS
Capacitance: 470uF/50V
Current Sensor: Yes
Input: 2-6S LIPO
Constant: 35A / Burst: 40A
BEC: No
Supports up to Dshot600, Proshot, Oneshot, Multishot
Target: G-H-30
Weight:6.9g
Mounting pattern: 20*20, φ3mm with Grommets φ2mm
Dimensions: 31*30mm (including the power pads)

Additional Suggested Parts
- DJI HD FPV Goggles
- Radio Controller
- DJI Remote Controller (Mode 2)
- Battery 4S 450mAh